Filling valve operation guide and step description
Release time:
2023-07-11
Filling valve is a device used to control the flow of fluid, which is widely used in various industrial fields. Its main function is to allow fluid to enter or discharge when needed to achieve the purpose of system pressure balance. Preparation before 2. operation, 1. Ensure that the filling valve and its surrounding area are dry, clean and free of debris.
Brief Introduction of 1. Filling Valve
Filling valve is a device used to control the flow of fluid, which is widely used in various industrial fields. Its main function is to allow fluid to enter or discharge when needed to achieve the purpose of system pressure balance.
Preparation before 2. operation
1. Ensure that the filling valve and its surrounding area are dry, clean and free of debris.
2. Check whether all connecting parts are tight and ensure that there is no leakage.
3. Wear protective equipment to prevent possible accidental injury during operation.
3. operation steps
1. Preparation before opening the filling valve: first ensure that the system pressure has dropped to a safe range, and then close the relevant equipment or machine.
2. Open the cover or protective cover of the filling valve.
3. Slowly open the filling valve so that it is in the open state. During this process, please pay attention to the reading of the pressure gauge to ensure that the system pressure is stable.
4. Use appropriate tools or equipment to fill with fluid as required. Ensure accurate filling and avoid too much or too little.
5. After filling, slowly close the filling valve. Ensure smooth action when closing to avoid excessive impact.
6. Check the filling valve and its surrounding area to ensure that there is no leakage. If there is leakage, readjust the filling valve and tighten the connecting parts.
7. Clean the site, remove protective equipment, and ensure that the work area is clean and tidy.
4. considerations
1. During operation, please follow relevant safety regulations to ensure personal safety.
2. When the filling valve is opened and closed, the action should be slow and stable to avoid excessive impact.
3. Regularly check the tightness of the filling valve and its connecting parts to ensure that there is no leakage.
4. If there is any abnormal situation, please stop the operation immediately and contact professionals for inspection and maintenance in time.
5. After the operation is completed, the site shall be cleaned in time to keep the work area clean and tidy.
5. Maintenance and Maintenance
1. Regularly check the sealing performance of the filling valve, and replace it in time if it is damaged.
2. Regularly clean the filling valve to maintain its good working condition.
3. Regularly tighten the filling valve and its connecting parts to ensure its fastening and reliability.
The above is the filling valve operation guide and steps, hoping to help you. For more questions, please feel free to consult a professional.
Contact Ruifeng
Manager Shi: 13398310103
Manager Qi: 13398312722
Address: Phase III of Chengnan Industrial Park, Industrial Concentrated Development Zone, jianyang city, Sichuan Province
Fax: 028-27020788
Zip Code: 641400
E-mail:scjyrf@163.com
Follow us